GOAT 3S CRAWLER BRUSHLESS SYSTEM FEATURES |
| User-friendly interface with six adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (5 settings), Drive Frequency in brush mode (7 settings), Li-Po Cut-Off|spacebar| and Reverse Motor Rotation |
| Water-resistant case with gasket seal |
| Sensor-based for excellent braking and low-speed driveability |
| Four status LEDs for easy programming and trouble shooting |
| Auto Detect Brushed Motor Mode, Locked Rotor Detection and Thermal Overload Protection |
| Oversized front motor bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life |
| Completely rebuildable motor design |
| Nickel-plated Crawling Sintered Tuning Rotor -- 14mm (#5950) with 0.125” pinion shaft that accepts all existing pinion gears included with Ballistic Crawler motors. |
| Meets RoHS compliance and includes 120-Day Warranty |
| Designed and assembled by Novak in Irvine, Calif., using globally-sourced components |
|spacebar| |
GOAT 3S CRAWLER BRUSHLESS SYSTEM SPECS |
| Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell) |
| System weight: 10.3 oz. (292.0 g) |
| ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm) |
| Design: Sensor-based |
| Motor Size: 2.07” x 1.41” (52.6 x 35.8mm) |
| Motor Limit: 13.5-turn (2S Li-Po) & 18.5-turn (3S Li-Po) Novak 540-size sensored brushless; 27-turn (2S Li-Po) & 33-turn (3S Li-Po) 540-sized brush motor |
| Kv: 1,650 (#3618); 1,350 RPM/VOLT (#3619) |
| Sensor Harness: 9” (230mm) |
| On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp. |
| BECs: 6.0 volts DC/5.0 amps; 6.0 volts DC/3.0 amps switching regulator (external) |
| Rated/Braking Current: 150 Amps @ 25°C trans. temp. |
| Status LEDs: 4 |
| Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when Li-Poly Cut-Off Circuitry is enabled) |
| Power Wires: 14G Super-Flex Copper-Strand Silicone Wire |
| Watts: 119 (#3618), 85 (#3619) |
|spacebar| |
REPLACEMENT / OPTIONAL PARTS |
| #5315 (optional) or #5320 (replacement) User-replaceable Input Harness |
| #5351-#5353 Brushless Shielded Sensor Harnesses – 4” & 6” (optional) 9” (replacement) |
| #5463 3-Amp High-Voltage Universal BEC (optional) |
| #5508 14-Gauge Silicone Brushless Wire Set (replacement) |
| #5600 Switch Harness (replacement) |
| #5647 Black Cooling Fan 25x25x10mm (replacement) |
| #5679 Racing Power Trans-Cap Module - 2S Li-Po and 4-6 cell NiMH (replacement) |
| #5686 Power Trans-Cap Module – 3S Li-Po |spacebar|(replacement) |
| #5731 Low-Loss Power Connectors – 3.5mm (optional) |
| #5940 Ballistic Front End Bell and Bearings – 1/8” (replacement) |
| #5941 Ballistic Sintered Rotor – 12.3mm (optional) |
| #5950 Crawling Sintered Tuning Rotor - 14mm (replacement) |
| #S5357 & #S5358 Brushless Motor Shielded Sensor Extension Harness – 4" & 9” (optional) |
| #S5420-#S5424 Brushless Motor Sleeves (replacement/optional) |
| #S5603 Remote Programming Switch – Hardwired (replacement) |
| #S5932 Ballistic Motor Hardware Kit (replacement) |
| #S5943 Ballistic Bearing Cap/Replacement Rear Bearing (replacement) |
| #S5944 Ballistic Back End Bell (replacement) |
| #S5945 Ballistic Crawler Sensor Assembly (replacement) |
| #S6613-#S6621 Ballistic Wound Stators – 13.5T-21.5T (replacement/optional) |