GOAT 3S CRAWLER BRUSHLESS SYSTEMS
 
 
 

 
 
 
|spacebar|
 
 
 
Goat 3S Set-Up Instructions
 
 
 
Ballistic Crawler Motor Instructions
 
 
 
 
 
  
To view a slideshow featuring Novak`s full line of crawling products, click here.
 
 
|spacebar|
 
 
 
 
 
 
 
Novak`s Ballistic Crawler Motors are available in two winds.
 
 
 

Ballistic Crawler Brushless Motor -- 18.5T (#3618)
 
 
 

Ballistic Crawler Brushless Motor -- 21.5T (#3619)
 
 
 
FUTURISTIC BALLISTIC CRAWLER
 
Novak’s next-generation Ballistic motors have entered the crawling field. The high-performance Ballistic Crawler Brushless Motors – 18.5T (#3618) and 21.5T (#3619) coupled with Novak’s impressive Goat 3S Crawler Brushless/Brush ESC are expected to be two of the most sought after brushless crawling systems on the market. Because of their extreme versatility, the Goat 3S Crawler Brushless Systems – 18.5T (#3028) and 21.5T (#3029) can tackle all crawling conditions with a simple stator switch. Because the crawler-specific hardware is located outside of the hand-wound stators, drivers can replace the stators at any time to properly combat any type of terrain or course. The Goat 3S Systems also have the ability to run on either two or three-cell Li-Po batteries via Novak’s auto-detect software. Additionally, one of the three profiles is specific for worm-drive vehicles, which do not require electronic drag brakes.
 
HIGH-LEVEL SPEED CONTROL
The Goat 3S’s completely programmable interface is preset to excel in any crawler rig, whether it be worm-drive or standard vehicles. Simply install it, push the One-Touch button and the Goat 3S will easily maneuver through any terrain. The powerful speed control also comes equipped with instant reverse via Novak’s Zero Reverse Delay, which provides immediate power delivery in both forward and reverse directions. Additionally, the Goat 3S’s third profile features a fully programmable brushed motor option to allow for motor experimentation. But the versatility doesn’t end there, attach a non-crawling Ballistic motor and the Goat 3S will operate the same as Novak’s speedy Havoc 3S with forward, brake and reverse settings. The Goat 3S also includes everything necessary to operate, including a cooling fan for additional airflow and an external high-voltage three-amps switching regulator to provide six volts of output without overheating the speed control.
 
 
 
 
 

Novak`s high-quality Crawling Sintered Tuning Rotor -- 14mm (#5950) is included with Novak`s Ballistic Crawler Brushless Motors (#3618-#3619).
 
HIGH-END CRAWLER MOTOR
And like all Novak Ballistic motors, the Ballistic Crawlers contain heavy-duty solder tabs and a removable nine-inch shielded sensor harness. And by taking advantage of the Ballistics’ interchangeable wound stator construction, crawlers can simply replace the installed 18.5 or 21.5-turn stator for any available stator between 13.5 and 21.5 turns. The motors are also equipped with a custom-silicone gasket seal to keep dirt and debris from damaging the motors’ sensor plug. The Ballistic Crawler motors also include a Crawling Sintered Tuning Rotor - 14mm (#5950). The rotor’s large diameter and exclusive magnetic material provide the motors with more torque and stronger braking. It also increases natural drag braking and improves the motors’ initial throttle response, providing more control on steep climbs and downhill descents.
 
 
 
 
 
 
 
 
 
GOAT 3S CRAWLER BRUSHLESS SYSTEM FEATURES 
 
 
 
User-friendly interface with six adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (5 settings), Drive Frequency in brush mode (7 settings), Li-Po Cut-Off|spacebar| and Reverse Motor Rotation
 
 
 
Water-resistant case with gasket seal
 
 
 
Sensor-based for excellent braking and low-speed driveability
 
 
 
Four status LEDs for easy programming and trouble shooting
 
 
 
Auto Detect Brushed Motor Mode, Locked Rotor Detection and Thermal Overload Protection
 
 
 
Oversized front motor bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
 
 
 
Completely rebuildable motor design 
 
 
 
Nickel-plated Crawling Sintered Tuning Rotor -- 14mm (#5950) with 0.125” pinion shaft that accepts all existing pinion gears included with Ballistic Crawler motors.
 
 
 
Meets RoHS compliance and includes 120-Day Warranty
 
 
 
Designed and assembled by Novak in Irvine, Calif., using globally-sourced components 
 
 
|spacebar|
 
 
GOAT 3S CRAWLER BRUSHLESS SYSTEM SPECS
 
 
 
Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
 
 
 
System weight: 10.3 oz. (292.0 g)
 
 
 
ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm)
 
 
 
Design: Sensor-based 
 
 
 
Motor Size: 2.07” x 1.41” (52.6 x 35.8mm)
 
 
 
Motor Limit: 13.5-turn (2S Li-Po) & 18.5-turn (3S Li-Po) Novak 540-size sensored brushless; 27-turn (2S Li-Po) & 33-turn (3S Li-Po) 540-sized brush motor
 
 
 
Kv: 1,650 (#3618); 1,350 RPM/VOLT (#3619)
 
 
 
Sensor Harness: 9” (230mm)
 
 
 
On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp.
 
 
 
BECs: 6.0 volts DC/5.0 amps; 6.0 volts DC/3.0 amps switching regulator (external)
 
 
 
Rated/Braking Current: 150 Amps @ 25°C trans. temp.
 
 
 
Status LEDs: 4 
 
 
 
Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when Li-Poly Cut-Off Circuitry is enabled) 
 
 
 
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
 
 
 
Watts: 119 (#3618), 85 (#3619)
 
 
|spacebar|
 
 
REPLACEMENT / OPTIONAL PARTS
 
 
 
#5315 (optional) or #5320 (replacement) User-replaceable Input Harness
 
 
 
#5351-#5353 Brushless Shielded Sensor Harnesses – 4” & 6” (optional) 9” (replacement)
 
 
 
#5463 3-Amp High-Voltage Universal BEC (optional) 
 
 
 
#5508 14-Gauge Silicone Brushless Wire Set (replacement)
 
 
 
#5600 Switch Harness (replacement)
 
 
 
#5647 Black Cooling Fan 25x25x10mm (replacement)
 
 
 
#5679 Racing Power Trans-Cap Module - 2S Li-Po and 4-6 cell NiMH (replacement) 
 
 
 
#5686 Power Trans-Cap Module – 3S Li-Po |spacebar|(replacement) 
 
 
 
#5731 Low-Loss Power Connectors – 3.5mm (optional) 
 
 
 
#5940 Ballistic Front End Bell and Bearings – 1/8” (replacement)
 
 
 
#5941 Ballistic Sintered Rotor – 12.3mm (optional)
 
 
 
#5950 Crawling Sintered Tuning Rotor - 14mm (replacement)
 
 
 
#S5357 & #S5358 Brushless Motor Shielded Sensor Extension Harness – 4" & 9” (optional)
 
 
 
#S5420-#S5424 Brushless Motor Sleeves (replacement/optional)
 
 
 
#S5603 Remote Programming Switch – Hardwired (replacement) 
 
 
 
#S5932 Ballistic Motor Hardware Kit (replacement)
 
 
 
#S5943 Ballistic Bearing Cap/Replacement Rear Bearing (replacement) 
 
 
 
#S5944 Ballistic Back End Bell (replacement) 
 
 
 
#S5945 Ballistic Crawler Sensor Assembly (replacement)
 
 
 
#S6613-#S6621 Ballistic Wound Stators – 13.5T-21.5T (replacement/optional)
 
*Kv readings are measured with Crawling Sintered Tuning Rotor -- 14mm (Novak #5950).One-Touch™, Goat 3S Crawler Brushless Systems™ & Ballistic Crawler Brushless Motors™ are registered trademarks of Novak Electronics, Inc.® 

상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

• 배송 방법 : 택배
• 배송 지역 : 전국지역
• 배송 비용 : 3,000원
• 배송 기간 : 3일 ~ 7일
• 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
  고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
  

교환 및 반품정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 포장제품의
 경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
 다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
 포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
 (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
 따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
 제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
 (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
 (색상 교환, 사이즈 교환 등 포함)