- HV Pro Brushless System 5.5T with 5mm Rotor (Kv=3,700; Watts=800)
 
MONSTER HORSEPOWER
 
 
 
 
 
 
 
 
 
 
 
 
 
#3524-3527 HV High-Voltage Brushless Motor with 5mm Shaft
 
The HV Pro Brushless System is made up of the rugged HV Brushless Motors with 5mm Shafts and specially designed HV Pro High-Voltage Brushless ESC that work seamlessly together to provide the ideal system for high-voltage applications. The HV Systems were specifically developed by Novak for R/C cars, and are ideal for monster trucks - such as the Traxxas?E-Maxx? Traxxas?E-Revo? HPI?E-Savage?and Kyosho?Twin Force?- converted electric 1/8-scale vehicles and vehicles with massive power needs.
 
HV PRO SYSTEM WINDS
Novak`s HV Pro Brushless Systems with 5mm Shafts are available in four motor winds:
 
 
HV Pro Brushless System 4.5T with 5mm Rotor (Kv=5,000; Watts=890) is best used for short, high-speed runs (#3024). 
HV Pro Brushless System 5.5T with 5mm Rotor (Kv=3,700; Watts=800) has superb control, and excels in racing and bashing applications (#3025). 
HV Pro Brushless System 6.5T with 5mm Rotor (Kv=3,400; Watts=730) is the best all-around-motor with a great balance between power and run time. It also shines in racing and bashing applications (#3026). 
HV Pro Brushless System 7.5T with 5mm Rotor (Kv=3,000; Watts=620) has incredibly smooth power delivery, making it the easiest to drive, and is recommended for users looking for the longest possible run times (#3027). 
 
HV BRUSHLESS MOTORS WITH 5MM SHAFTS
In addition to its already impressive features, including awesome starting torque, low-speed driveability, and no cogging for smooth acceleration and smooth braking, the HV Series of motors (#3524-3527) has been fitted with a rugged 5mm output shaft for maximum resilience and race life. The HV Series is ideal for monster trucks, converted electric 1/8-scale vehicles and vehicles requiring massive power output. Additionally, the motors are sensor-based, so they always know the position of the rotor, which provides excellent starting torque and continuous synchronization for smooth, controlled low-speed driveability and consistent brakes. Simply stated, it means no uncontrolled bursts of power or delays! HV-Series of motors also features a shielded sensor cable with sheathed sensor wires and a completely rebuildable design.
 
RECOMMENDED GEARING FOR TRAXXAS?/FONT> E-MAXX?/EM> AND E-REVO?/EM>
For longevity of your system, it is recommended to use a 12-tooth pinion gear, such as Novak`s 5mm Mod 1 Hardened Steel Pinion Gear -- 12T (#5101). The below table is recommended only for maximum gearing.
 
 
 
HV PRO BRUSHLESS/BRUSH ESC
Completing the HV Pro Brushless System is the fully programmable HV Pro ESC, which can accommodate 6-14 Ni-Cd/Ni-MH cells (7.2-16.8 volts) or 2S-4S Li-Po and can be wired for dual or single battery packs. This high-power, reversible brushless speed control is also easy to install and operate. The HV Pro uses the same screw pattern as the Traxxas?E-Maxx? Traxxas?E-Revo? HPI?E-Savage?/FONT> and Kyosho?/FONT> Twin Force?/FONT>, making it convenient to install, and it includes a Power-Boost ESC Cooling fan kit and factory-installed motor heat sink for superior cooling. In addition, the HV Pro High-Voltage Brushless ESC includes many of the same great features found in high-quality Novak ESCs, such as One-Touch Set-Up, Thermal Overload Protection, a powerful BEC, Polar Drive and Digital Anti-Glitch circuitry and Smart Braking II. 
 
Novak has also done away with the external Li-Po module with the inclusion of the built-in, auto-detect Smart-Stop Li-Po Cut-Off Circuitry*. When active, the Cut-Off Circuitry automatically switches to the proper Li-Po cut-off voltage for the connected battery packs, preventing the batteries from going below the critical safety voltage level.

In addition, the ESC includes black heat sinks for better heat transfer. You won뭪 mistake this high-voltage system with any other!
 
HV PRO PROGRAMMABILITY
In addition to full programmability, Novak뭩 HV Pro High-Voltage Brushless ESC (#3221) has three throttle profiles ?two with reverse and one with forward/brake. Each throttle profile has on-board programming for extreme versatility and unmatched customization for Minimum Brake, Drag Brake, Dead Band, Minimum Drive, Throttle Curve, Brake Frequency, Brake Disable, Motor Rotation and Li-Po Cut-Off. These programming features make operating an R/C car as easy as One-Touch set-up. Novak뭩 Throttle Curve adjustment allows drivers to tailor the throttle response, creating either a quick burst of power with the Linear Curve setting, or a smoother, controlled low-end power delivery with the Expo Curve setting.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5mm Mod 1 Hardened Steel Pinion Gears
 
 
5mm 32-Pitch Steel Pinion Gears
 
GEARS
To mesh with the HV Brushless Motor뭩 rugged 5mm output shaft, Novak also offers two series of precision steel pinion gears. Novak뭩 5mm Mod 1 Hardened Steel Pinion Gears (#5100-5110) are recommended for Novak뭩 1/8-scale Conversion Kits (#5010-5019), and Novak뭩 5mm 32-Pitch Steel Pinion Gears (#5152-5157) are recommended for powering monster trucks that use a 32-pitch plastic spur gear. 
 
Like all Novak brushless systems, the brushless speed control and brushless motor are factory wired and tested together, so they are ready to 뱎lug and play?straight out of the box.

MOTOR COMPATIBILITY
The HV Pro ESC and motor contain Thermal Overload Protection circuitry to protect the system from overheating and damage. In fact, the ESC will only operate with the HV-Series or other brushless motors that have built-in thermal protection that follow ROAR guidelines. This sophisticated feature ensures a fun day at the track without the worry of overheating. For the complete list of compatible motors, click here.

For HV High-Voltage Brushless Motor with 5mm Shaft Features and Specifications, click here.
For HV Pro Brushless ESC Features and Specifications, click here.
 
* Novak`s HV Pro ESC with serial numbers that begin with either" B1V" or "D1V" includes an external Smart-Stop 4-Cell Li-Po Cut-Off Module and has different programmability. For programming sheet for this version, click here.
 
** High quality battery connectors are required.

상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

• 배송 방법 : 택배
• 배송 지역 : 전국지역
• 배송 비용 : 3,000원
• 배송 기간 : 3일 ~ 7일
• 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
  고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
  

교환 및 반품정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 포장제품의
 경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
 다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
 포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
 (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
 따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
 제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
 (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
 (색상 교환, 사이즈 교환 등 포함)