FIRST SENSOR-BASED MICRO MOTORS Novak`s Mod 0.5 and0.6 Aluminum PinionGear Sets include three gears that fit seamlessly with Novak`s Three-80 Micro Pro Brushless Motor, which has a 1/8" output shaft.
Compatibility Mod 0.6: For DuraTrax Vendetta line Mod 0.5: For Associated, Kyosho and Team Losi`s micro vehicles, as well as Tamiya`s TamTech line. #5200 Mod 0.6 Set: 11T/12T/13T #5210 Mod 0.5 Set: 11T/12T/13T Works well on small, tight tracks #5201 Mod 0.6 Set: 14T/15T/16T #5211 Mod 0.5 Set: 14T/15T/16T Excels on medium-sized tracks #5202 Mod 0.6 Set: 17T/18T/19T #5212 Mod 0.5 Set: 17T/18T/19T Performs great on large tracks | | Novak has bred a micro brushless motor that is the first sensor-based brushless motor specifically designed for1/18 and 1/16-scale cars. Because it is sensored and lightweight, it gives these micro scale cars the ability to maneuver at high speeds in extremely tight spaces, all with unsurpassed low speed and braking control. The Three-80 Brushless Motors are perfectly matched with Novak`s Mongoose’s Brushless/Brush ESC to maximize performance and handle with the agility and speed of a mongoose. The Three-80 Micro Pro Brushless Motor Series is available in three motor winds: - Three-80 Micro Pro Brushless Motor 8.5T is 8.5 turns and 9,000 Kv and recommended for drivers looking for the fastest Novak sensor-based Micro Brushless System. (#3450)
- Three-80 Micro Pro Brushless Motor 10.5T is 10.5 turns and 7,300 Kv and recommended for racers looking for a system that offers a great balance between power and runtime. (#3451)
- Three-80 Micro Pro Brushless Motor 13.5T is 13.5 turns and 6,000 Kv and recommended for users looking for power with the longest possible runtimes. (#3452)
WHY SENSORED? Like the popular Novak Velociti brushless motors, the Three-80 Micro Pro motors feature a sensor commutation design. Knowledge of rotor position is key to smooth performance and is just as important in micro vehicles as in larger-scale vehicles. When the speed control always knows the rotor position, there is no hesitation before acceleration under load. The motor will provide smooth braking and controlled bursts of power. Other motor features include a high-strength, sintered Neodymium rotor for maximum motor acceleration, an oversized front bearing for increased load handling and bearing life, and a rugged 1/8” shaft diameter. Like all Novak brushless motors, the Three-80 Micro Pro motors are rebuildable.
Of its many features, its sensor-based design allows for most of the motor`s important benefits, including the following: - No Cogging--Thanks to constantly knowing the rotor position, the motor provides instantaneous throttle response and smooth transitions from neutral to drive. The rotor position knowledge is attained due to the ESC and motor being continuously synchronized via the motor harness.
- Smooth & Controlled Low Speed Driveability--Always knowing the rotor angle is key to smooth acceleration without delivering abrupt and uncontrolled bursts of power.
- Strong/Consistent Brakes & Starting Torque--Rotor position knowledge results in consistent starts and stops, without hesitation or inconsistent lag times before acceleration or braking--this translates to consistant lap times.
- Thermal Protection--Position and temperature sensors inside motor provide unparalleled thermal protection, letting you run pack after pack without worrying about overheating the motor, ESC or magnets.
All Novak brushless motors are designed by Novak in Irvine, Calif. Each motor is factory hand-wound and is put through rigorous testing, including a final dyno test to ensure that each motor meets Novak’s rigid specifications. Mongoose Micro Brushless/Brush ESC | | ESC COMPATIBILITY The Three-80 Micro Pro Brushless Motors are compatible with the Mongoose Micro Brushless/Brush ESC (#1718). The Mongoose Micro Brushless/Brush ESC is a versatile, fully featured speed control specifically developed for micro applications. In addition to its compatibility with both brushless and brush motors, it instinctively knows via its Auto-Detect Brushed Mode when a brush motor is connected. Multiple throttle profiles are included for different driving styles, including a racing brushless profile for top-level forward performance and two profiles with reverse. Additional features of the Mongoose Micro ESC are its on-board programmability, built-in 2S & 3S Li-Po Cut-off Circuitry, heavy duty 6.0V/2A BEC and a water-resistant case.
The Mongoose Micro Brushless/Brush ESC (#1718) and the Mongoose Micro Brushless Systems [8.5-turn (#3050), 10.5-turn (#3051) and 13.5-turn (#3052)] are also available individually.
THREE-80 MICRO PRO BRUSHLESS MOTOR FEATURES | | 380-size brushless motor specifically designed by Novak for 1/16th to 1/18th scale micro vehicles | | Oversized, rugged|spacebar| front bearing for increased load handling and bearing life | | Multiple motor mount screw patterns | | Lightweight ribbed aluminum end bells | | Rebuildable design: user-replaceable rotor (#5915) and replacement front endbell & bearing kit (#5916) | | Compatible with Novak Mod 0.6 Pinion Gears (#5200, #5201 & #5202) and Mod 0.5 Pinion Gears (#5210, #5211 & #5212) | | Thermal Overload Protection (when used with a Novak Mongoose Brushless/Brush ESC) | | Meets RoHS compliance and includes 120-Day Warranty | | Designed, hand-wound and dyno-tested by Novak in Irvine, Calif. | | |spacebar| | THREE-80 MICRO PRO BRUSHLESS MOTOR SPECIFICATIONS | | Turns: 8.5 (#3450), 10.5 (#3451), 13.5 (#3452) | | Watts: 210 (#3450), 165 (#3451), 125 (#3452) | | Kv (unloaded): 9,000 (#3450), 7,300 (#3451), 6,000 (#3452) | | Motor Size: 380 size: 1.02" D x 1.48" L (26 D x 37.7 L mm) | | Motor Weight with wires: 2.54 oz. (72 grams) | | Shaft Diameter: 1/8" [accepts all existing pinion gears] | | Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x 3mm) | | |